Bộ điều khiển Deepsea DSE3110-MPU

Bộ điều khiển Deepsea DSE3110-MPU: Manual & Auto Start Control Module

Bộ điều khiển Deepseea DSE3110-CAN

Hình ảnh bộ điều khiển Deepsea DSE3110

FEATURES
 
 
 
The DSE3110 can be utilised as a
Manual or Auto Start Module for
single gen-set applications or
engine only applications. The
module has been designed to work
with electronic and non-electronic
engines, providing advanced
engine monitoring and protection
features.
The DSE3110 includes a back-lit
icon LCD display which clearly
shows the status of the engine at
all times.
The module monitors engine
speed, frequency, voltage and
engine run hours and also displays
the warning and shutdown status.
The module includes fixed and
flexible outputs as well as
configurable inputs making this
product ideal for a wide variety of
applications. The module can either
be programmed using the front
panel or by using the DSE
Configuration Suite PC software.
The module is available in two
variants:
CAN – For use with electronic
engines only.
• Optional frequency (Hz) sensing
from main AC alternator for genset applications.
MPU/ALT. – For use with nonelectronic engines only (magnetic
pick-up/alternator sensing).
• Optional frequency (Hz) sensing
from main AC alternator for genset applications.
• Optional Magnetic Pickup speed
sensing.
 
KEY FEATURES

 • Back-lit icon LCD display
• Front panel editing
• LED and LCD alarm indication
• Power Save mode
• CAN and Magnetic Pick-up/Alt.
versions available (specify on
ordering)
• PC configurable
• 6 Digital inputs
• 4 Outputs (2 configurable on
Magnetic Pick up/Alt., 4
configurable on CAN version)
• Configurable timers and alarms
• Alternative configuration
• Remote Start input
• Generator voltage display
 
 
 
• Generator frequency display
• Battery voltage display
• Engine speed display
• Hours counter
• Engine pre-heat
• Comprehensive shutdown or
warning on fault condition
 
KEY BENEFITS
 
• Tamper-proof hours counter
provides accurate information
for monitoring and maintenance
periods
• Multiple engine parameters are
monitored simultaneously
• Module can be configured to
suit individual applications
• Suitable for engine only
applications
• Compatible with a wide range
of CAN engines
• Uses DSE Configuration Suite
PC software for simplified
configuration
• IP65 rating (with optional
gasket) offers increased
resistance to water ingress
• Licence-free PC software
 
SPECIFICATION
 
 
 
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 1 0 V before dropout
and supply recovers to 5 V. This is achieved
without the need for internal batteries
CHARGE FAIL/ EXCITATION
8 V to 35 V fixed power source 2.5 W
NOMINAL STANDBY CURRENT
23 mA at 1 2 V, 1 8 mA at 24 V
MAXIMUM OPERATING CURRENT
35 mA at 1 2 V, 30 mA at 24 V
OUTPUTS
OUTPUT A (FUEL)
2 A DC at supply voltage
OUTPUT B (START)
2 A DC at supply voltage
AUXILIARY OUTPUTS C,D
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
1 5 V - 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK UP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
1 0,000 Hz (max)
DIMENSIONS
OVERALL
98 mm x 79 mm x 40 mm
3.9” x 3.1 ” x 1 .6”
PANEL CUT-OUT
80 mm x 68 mm
3.1 ” x 2.7”
MAXIMUM PANEL THICKNESS
8 mm
0.3”

 

 

 

 

 

 

 

 

Sản phẩm cùng loại (9)