Bộ điều khiển Deepsea DSE8610 (hòa đồng bộ)

DSE8610 MKII: SYNCHRONISING AUTO - START LOAD SHARE CONTROL MODULE

 

The DSE8610 MKII is an easy to use
Synchronising Auto Start Control
Module suitable for use in a
multi-generator loadshare system,
designed to synchronise up to 32
generators including electronic and
non-electronic engines.
The DSE8610 MKII monitors the
generator and indicates operational
status and fault conditions,
automatically starting or stopping
the engine on load demand or fault
condition.
System alarms are annunciated on
the LCD screen (multiple language
options available), illuminated LED
and audible sounder.
The event log will record 250 events
to facilitate easy maintenance, and an
extensive number of fied and flxible
monitoring, metering and protection
features are included.

Designed to offer increased built
in support for active sensors for
0 V to 10 V & 4 mA to 20 mA.
Comprehensive communication
and system expansion options are
available.
Using the DSE PC Confiuration Suite
Software allows easy alteration of the
operational sequences, timers and
alarms. With all communication ports
capable of being active at the same
time, the DSE8610 MKII is ideal for a
wide variety of demanding load share
applications.

KEY LOAD SHARE FEATURES:
• Peak lopping/sharing (with
appropriate DSE mains controller)
• Sequential set start
• Manual voltage/frequency
adjustment
• R.O.C.O.F. and vector shift
protection
• Generator load demand
• Automatic hours run balancing
• Mains (Utility) decoupling
• Mains (Utility) decoupling
test mode
• Dead bus sensing
• Bus failure detection
• Direct governor and AVR control
• Volts and frequency matching
• kW and kvar load sharing
• Dead bus synchronising

 

FEATURES

 

 

 

• Comprehensive synchronising &
loadsharing capabilities
• Built in governor and AVR control
• Base load (kW export) control
• Positive & negative kVAr export
control
• Mains (Utility) decoupling protection
• 4-Line back-lit LCD text display
• Multiple Display Languages
• Five key menu navigation
• LCD alarm indication
• Heated display option available
• Customisable power-up text and
images
• DSENet expansion compatibility
• Data logging & trending facility
• Internal PLC editor
• Protections disable feature
• Fully confiurable via PC using
USB, RS232, RS485 & Ethernet
communication
• Front panel confiuration with
PIN protection
• Power save mode
• 3 phase generator sensing and
protection
• Generator current and power
monitoring (kW, kvar, kVA, pf)
• kW and kvar overload alarms
• Reverse power alarms
• Over current protection
• Unbalanced load protection
• Independent earth fault protection
• Breaker control via fascia buttons
• Fuel and start outputs confiurable
when using CAN
• 8 confiurable DC outputs
• 2 confiurable volt-free relay
outputs

 

• 4 confiurable analogue/digital
inputs
• Built in sensors to support 0 V to 10
V & 4 mA to 20 mA
• 12 confiurable digital inputs
• Confiurable 5 stage dummy load
and load shedding outputs
• CAN, MPU and alternator frequency
speed sensing in one variant
• Real time clock
• Manual and automatic fuel pump
control
• Engine run-time scheduler
• Fuel usage monitor and low fuel
level alarms
• Simultaneous use of all
communication ports
• Remote SCADA monitoring via
various DSE software applications
• MODBUS RTU & TCP support with
confiurable MODBUS pages for
integration into building
management systems (BMS)
• Advanced SMS messaging
(additional external modem required)
• Start & stop capability via SMS
messaging
• 3 confiurable maintenance alarms
• Compatible with a wide range of
CAN engines, including tier 4
engine support
• Uses DSE Confiuration Suite PC
Software for simplifid confiuration
• Power modes for when in parallel
with the mains
• Redundant MSC communication
wired to CAN ports
• True manual breaker control when
in CAN mode
• Water in fuel digital input

• Fuel tank bund alarm digital input
• Separate ramp up and ramp down
rates confiurable via PLC
• Confiurable CAN message time-
outs
• In-built SNMP
• Confiurable CAN transmit &
receive
• Battery chargers on DSENet®

KEY BENEFITS

• Compatible in load share systems
containing DSE5500, DSE7500,
DSE8000 and DSE8600 MKII
series. Contact DSE for further
details
• 132 x 64 pixel ratio display for
clarity
• Real-time clock provides accurate
event logging
• Ethernet communication, provides
builit in advanced remote
monitoring.
• Can be integrated into building
management systems (BMS) and
programmable logic control (PLC)
• Increased input and output
expansion capability via DSENet®
• Licence-free PC software
• IP65 rating (with supplied gasket)
offers increased resistance to water
ingress
• Advanced Internal PLC editor
allows user confiurable functions
to meet specifi application
requirements.

 

SPECIFICATION

 

 

 

DC SUPPLY
DC SUPPLY
CONTINUOUS VOLTAGE RATING
5 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is
achieved without the need for internal
batteries. LEDs and backlight will not be
maintained during cranking.
MAXIMUM OPERATING CURRENT
530 mA at 12 V, 280 mA at 24 V
MAXIMUM STANDBY CURRENT
320 mA at 12 V, 160 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
GENERATOR & BUS
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE
10,000 Hz (max)
INPUTS
DIGITAL INPUTS A TO L
Negative switching
ANALOGUE INPUTS A TO D
Confiurable as:
Negative switching digital input
0 V to 10 V sensor
4 mA to 20 mA sensor
0 Ω to 480 Ω sensor
OUTPUTS
OUTPUT A & B (FUEL & StART)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt-free)
AUXILIARY OUTPUTS E to L
2 A DC at supply voltage
BUILT IN AVR GOVERNOR CONTROL
MINIMUM LOAD IMPEDANCE
500 Ω
Fully isolated

GAIN VOLTAGE
0 V to 10 V DC
Fully isolated
OFFSET VOLTAGE
0 V to 10 V DC
Fully isolated
DIMENSIONS
OVERALL
245 mm x 184 mm x 51 mm
9.6” x 7.2” x 2.0”
PANEL CUT-OUT
220 mm x 160 mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8 mm
0.3”
STORAGE TEMPERATURE RANGE
-40 °C to +85 °C
-40 °F to +185 °F
OPERATING TEMPERATURE RANGE
-30 °C to +70 °C
-40 °F to +185 °F
HEATED DISPLAY VARIANT
-40 °C to +70 °C
-40 °F to +158 °F

 

EXPANSION DEVICES

• DSE124 CAN/MSC Extender
• DSE2130 Input Expansion Module
• DSE2131 Ratio-metric Input
Expansion Module
• DSE2133 RTD & Thermo-couple
Expansion Module
• DSE2152 Ratio-metric Output
Expansion Module
• DSE2157 Output Expansion
Module
• DSE2548 LED Expansion