Bộ điều khiển Deepsea DSE7120

Bộ điều khiển Deepsea DSE7120 MKII - Auto Mains (Utility) Failure Control Module

Bộ điều khiển Deepseea DSE7120

Hình ảnh bộ điều khiển Deepsea DSE7120

 

FEATURES
 
 
 
The DSE7110 MKll Auto Start
Control Module and the DSE7120
MKll Auto Mains (Utility) Failure
Control Module are suitable for a
wide variety of single gen-set
applications.
Monitoring engine speed, oil
pressure, coolant temperature,
frequency, voltage, current, power
and fuel level, the modules will give
comprehensive engine and
alternator protection. This will be
indicated on a large back-lit LCD
icon display via an array of warning,
electrical trip and shutdown alarms
 
Electronic J1 939 (CAN) and nonelectronic MPU and alternator
sensing engine support for diesel,
gas and petrol engines all in one
variant. With a number of flexible
inputs, outputs and protections, the
modules can be easily adapted to
suit a wide range of applications.
Compehensive power metering for
both generator and load is available
(kW, kV A, kV Ar, pf). A real time
clock allows scheduling while a 50
event log provides extensive event
interrogation.
Through USB Communication both
modules can be easily configured
using the DSE Configuration Suite
PC Software or can be fully
configured through the module's
front panel editor.
All DSE products are supported by
the DSE global technical support
team which gives our customers
and end users access to 24 hour
system help and advice.
KEY BENEFITS

• Automatically transfers between
mains (utility) and generator
(DSE71 20 MKll only)
• Hours counter provides accurate
information for monitoring and
maintenance periods
• User-friendly set-up and button
layout for ease of use
• Multiple parameters are
monitored & displayed
simultaneously
• The module can be configured
to suit a wide range of
applications
• Compatible with a wide range
of CAN engines, including tier 4
engine support
• Uses DSE Configuration Suite
PC Software for simplified
configuration
• Licence-free PC software
• IP65 rating (with supplied
gasket) offers increased
resistance to water ingress
KEY FEATURES

• Large back-lit icon display
• Heated display option available
• Fully configurable via the fascia
or PC using USB
communication
• Extremely efficient power save
mode
• 3 phase generator sensing
• 3 phase mains (utility) sensing
(DSE71 20 MKll only)
• Generator/load power
monitoring (kW, kV A, kV Ar, pf)
• Generator overload protection
(kW)
• Generator/load current
monitoring and protection
• Fuel and start outputs
(configurable when using CAN)
• 4 configurable DC outputs
• 2 configurable volt-free outputs
• 4 configurable analogue/digital
inputs
• 6 configurable digital inputs
• Support for 0-1 0 V & 4-20 mA
oil pressure sensors
 
 
• Configurable staged loading
outputs
• CAN, MPU and alternator
speed sensing in one variant
• 3 engine maintainance alarms
• Engine speed protection
• Engine hours counter
• Engine pre-heat
• Engine run-time scheduler
• Engine idle control for starting &
stopping
• Battery voltage monitoring
• Start on low battery voltage
• Real time clock
• Fuel pump control
• Configurable remote start input
• 1 alternative configuration
• Comprehensive warning,
electrical trip or shutdown
protection upon fault condition
• LCD and LED alarm indication
• Event log (50)
SPECIFICATION
 
 
 
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 1 0 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.
MAXIMUM OPERATING CURRENT
290 mA at 1 2 V, 1 40 mA at 24 V
MAXIMUM STANDBY CURRENT
75 mA at 1 2 V, 40 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
GENERATOR & MAINS (UTILITY)
VOLTAGE RANGE
1 5 V to 41 5 V AC (Ph to N)
26 V to 71 9 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICKUP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
1 0,000 Hz (max)
INPUTS
DIGITAL INPUTS A TO F
Negative switching
ANALOGUE INPUTS A TO C
Configurable as:
Negative switching digital input
0 Ω to 480 Ω
ANALOGUE INPUT D
Configurable as:
Negative switching digital input
0 V to 1 0 V
4 mA to 20 mA
0 Ω to 480 Ω
OUTPUTS
OUTPUT A & B (FUEL & START)
1 0 A short term, 5 A continuous,
at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt-free)
AUXILIARY OUTPUTS E, F, G & H
2 A DC at supply voltage
DIMENSIONS
OVERALL
240 mm x 1 81 mm x 42 mm
9.4” x 7.1 ” x 1 .6”
PANEL CUT-OUT
220 mm x 1 60 mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8 mm
0.3”
STORAGE TEMPERATURE RANGE
-40 °C to +85 °C
-40 °F to +1 85 °F
OPERATING TEMPERATURE RANGE
-30 °C to +70 °C
-22 °F to +1 58 °F
HEATED DISPLAY VARIANT
-40 °C to +70 °C
-40 °F to +1 58 °F

 

 

 

 

 

 

Sản phẩm cùng loại (9)