FEATURES
The DSE6010 MKII Auto Start Control Module and the DSE6020 MKII Auto Mains (Utility) Failure Control Module are suitable for a wide variety of single gen-set applications. Monitoring engine speed, oil pressure, coolant temperature, frequency, voltage, current, power and fuel level, the modules give comprehensive engine and alternator protection. This is indicated on a large back-lit LCD icon display via an array of warning, electrical trip and shutdown alarms	Electronic J1 939 (CAN) and nonelectronic MPU and alternator sensing engine support for diesel, gas and petrol engines all in one variant. With a number of flexible inputs, outputs and protections, the modules can be easily adapted to suit a wide range of applications. Through USB Communication both modules can be configured using the DSE Configuration Suite PC Software or through the module's front panel editor	Using the DSE Configuration Suite PC Software the controller is easy to use and configure which allows alteration of operating parameters, sequences, timers and alarms.
KEY BENEFITS • Automatically transfers between mains (utility) and generator (DSE6020 MKII only) • Hours counter provides accurate information for monitoring and maintenance periods • User-friendly set-up and button layout for ease of use • Multiple parameters are monitored simultaneously which are clearly displayed on a large back-lit icon display • The module can be configured to suit a wide range of applications • Compatible with a wide range of CAN engines, including tier 4 engine support • Uses DSE Configuration Suite PC Software for simplified configuration • Licence-free PC software • IP65 rating (with optional gasket) offers increased resistance to water ingress	KEY FEATURES • Large back-lit icon display • Heated display option available • Fully configurable via the fascia or PC using USB communication • Efficient power save mode • 3 phase generator sensing • 3 phase mains (utility) sensing (DSE6020 MKII only) • Generator/load power monitoring (kW, kV A, kV Ar, pf) • Accumulated power monitoring (kW h, kVA h, kVAr h) • Generator overload protection (kW) • Generator/load current monitoring and protection • Breaker control via fascia buttons • Fuel and start outputs, configurable when using CAN • 4 configurable DC outputs • 4 configurable analogue/digital inputs • 6 configurable digital inputs	• Support for 0-1 0 V & 4-20 mA oil pressure sensors • Configurable staged loading outputs • CAN, MPU and alternator speed sensing in one variant • 3 engine maintenance alarms • Engine speed protection • Engine hours counter • Engine pre-heat • Engine run-time scheduler • Engine idle control for starting & stopping • Fuel pump control • Real time clock • Battery voltage monitoring • Start on low battery voltage • Configurable remote start input • 1 alternative configuration • Comprehensive warning, electrical trip or shutdown protection upon fault condition • LCD and LED alarm indication • Configurable event log (50)
SPECIFICATION
DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 1 0 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 1 00 mA at 1 2 V, 1 05 mA at 24 V MAXIMUM STANDBY CURRENT 60 mA at 1 2 V, 55 mA at 24 V MAXIMUM SLEEP CURRENT 40 mA at 1 2 V, 35 mA at 24 V GENERATOR & MAINS (UTILITY) VOLTAGE RANGE 1 5 V to 41 5 V AC (Ph to N) 26 V to 71 9 V AC (Ph to Ph)	FREQUENCY RANGE 3.5 Hz to 75 Hz INPUTS DIGITAL INPUTS A to F Negative switching ANALOGUE INPUTS A to C Configurable as: Negative switching digital input 0 Ω to 480 Ω ANALOGUE INPUT D Configurable as: Negative switching digital input 0 V to 1 0 V 4 mA to 20 mA 0 Ω to 480 Ω OUTPUTS OUTPUT A (FUEL) 1 0 A short term, 5 A continuous, at supply voltage OUTPUT B (START) 1 0 A short term, 5 A continuous, at supply voltage AUXILIARY OUTPUTS C, D, E & F 2 A DC at supply voltage	DIMENSIONS OVERALL 21 6 mm x 1 58 mm x 43 mm 8.5’’ x 6.2” x 1 .5” PANEL CUT-OUT 1 84 mm x 1 37 mm 7.2’’ x 5.3” MAXIMUM PANEL THICKNESS 8 mm 0.3” STORAGE TEMPERATURE RANGE -40 °C to +85 °C -40 °F to +1 85 °F OPERATING TEMPERATURE RANGE -30 °C to +70 °C -22 °F to +1 58 °F HEATED DISPLAY VARIANT -40 °C to +70 °C -40 °F to +1 58 °F

Bộ điều khiển Deepsea DSE6020