Máy phát điện Cummins C2250D5P công suất liên tục 2250KVA, công suất dự phòng 2500KVA

Genset - 2000 KVA Specification/ Thông số máy phát điện Cummins C2250D5P: 2250KVA/2500KVA

Make: Cummins India
2250 kVA Prime/ 2500 kVA Standby

Standard scope/ Phạm vi tiêu chuẩn cung cấp

Engine (Động cơ):Cummins® ‘QSK60 series’ full authority electronic injection, water cooled engine, 16 cylinder, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 /ISO 13018 has the following specifications:

  • Cummins Full Authority electronics
  • Cummins HPI injectors
  • Cummins turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connections (4 Turbos)
  • Radiator or heat exchanger, coolant inhibitor
  • Plate type lube oil cooler
  • Outboard aftercoolers
  • Full flow paper element filters – fuel, lube oil and by-pass
  • Dry type replaceable paper element air cleaner with restriction indicator
  • Flywheel housing & flywheel to suit single bearing alternator
  • Starting motor – Electric
  • Battery charging alternator
  • Cummins PowerCommand® microprocessor based genset controller
  • First fill lube oil

Alternator (Đầu phát điện):

Stamford brushless alternator

  • Seperately excited, self-regulated
  • Salient pole revolving field
  • Single / double bearing
  • VPI epoxy impregnated insulation technology
  • Re-greasable deep groove Single bearing
  • Excitation – PMG based brushless

Accessories (Phụ kiện)

  • Silencer suitably optimized to reduce noise
  • Sturdy base rail
  • 990 ltrs. free standing fuel tank
  • Batteries with connecting leads and terminals

Optional (Lựa chọn thêm)

Engine
Lube oil / Coolant heater with thermostatic switch, Air Starter
Alternator
Space heater, RTDs (Std. for HT), BTDs, Double Bearing
Control Panel
AMF control panel, Battery charger, Remote/Auto start panel, Auto/Manual synchronizing panel, Audio/Visual annunciation for faults
Oil Pan: 398 lts. oil pan for extended oil change interval for 2000 kVA

2250kVA GENERATORS SET SPECIFICATIONS 

THÔNG SỐ MÁY PHÁT ĐIỆN CUMMINS C2250D5P / 2250KVA

Model C2250 D5 P
Prime Power / Standby kVA 2250/2500
Output Voltage and Frequency 380-415V/ *3.3/ *6.6/ 11KV - 50Hz
Power Factor 0.8 (lag)
No. of phases 3 phase

ENGINE SPECIFICATIONS/ THÔNG SỐ ĐỘNG CƠ

Make Cummins
Model QSK 60 G8
No. of cylinders 16 ‘Vee’
Aspiration Turbocharged - LTA Aftercooled
Bore x Stroke 159 mm x 190 mm
Displacement 60.2 ltrs
Output - Prime 2603 bhp (1942 kWm)
Fuel consumption @ 75% load with Rad/HE 331/321 ltr/hr
Fuel consumption @ 100% load with Rad/HE 441/430 ltr/hr
Typical oil consumption @ 100% load -
Total wet weight ( engine + radiator) 9904 kg
Length x Width x Height (engine) 2780 x 1591 x 1960 mm
Compression Ratio 14.5:1
Piston Speed 9.5 m/s
Governor / Class Electronic / A1
Lubricating oil sytem capacity 398 ltrs
Coolant capacity (engine + radiator) 621 ltrs
Combustion air intake @ 100% load (+/- 5%) 156 m3/min
Exhaust Temperature 485 oC

ALTERNATOR SPECIFICATIONS/ THÔNG SỐ ĐẦU PHÁT ĐIỆN

Make Stamford-LT Stamford-HT
Frame size / Model No. PI734H HVSI804R
Voltage Regulation 0.50% 0.50%
Insulation Class H Class F
Standard Enclosure IP 23 IP 23
Winding Pitch 2 / 3 Pitch 2 / 3 Pitch
Stator Winding Double layer lap,
form wound
Double layer lap,
form wound
Rotor Dynamically
balanced
with grade 2.5
Dynamically
balanced
with grade 2.5
Wave form distortion No load < 1.8 %,
non distorting 
balanced linear
load < 5 %
No load < 1.5 %
non distorting 
balanced linear
load < 5 %
Total Harmonic Factor Better than 2% Better than 2%

 

Sản phẩm cùng loại (6)